LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Sonata LX, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Anti-Lock Brake System) >> Abs (Anti-Lock Brake System) >> Hi-Scan (Pro) Check

Hi-Scan (Pro) Check

WARNING: This page is about a different car, the 2003 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition OFF.
  2. Connect the Hi-Scan (Pro) to the Data Link Connector located underneath the lower crash pad panel.
  3. Turn the ignition ON.
  4. Use the Hi-Scan (Pro) to check for diagnostic trouble codes.
  5. After completion of the repair or correction of the problem, erase the stored fault codes using the clear key on the Hi-Scan (Pro).
  6. Disconnect the Hi-Scan (Pro).
    Fig 1: Identifying Data Link Connector Terminals
    G00961468Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals