LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Sonata LX, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - 2.7L >> Self-Diagnostic System >> Testing Procedure

Testing Procedure

NOTE: Before performing testing procedure, check for any related Technical Service Bulletins (TSBs).

Diagnosis of computerized engine control system should be performed in the following order:

  1. Perform visual inspection. Most driveability problems in the engine control system result from faulty wiring, poor electrical connections or leaking air and vacuum hose connections. To avoid unnecessary component testing, perform a visual inspection before beginning self-diagnostic tests.
  2. Ensure all mechanical engine systems other than computerized systems (i.e., compression, ignition, etc.) are operating properly. DO NOT proceed with testing unless all other problems have been repaired. If MIL is on, see RETRIEVING DIAGNOSTIC TROUBLE CODES  . After retrieving diagnostic trouble codes, see DIAGNOSTIC TROUBLE CODE DEFINITIONS  table.
  3. After repair procedures have been completed, clear DTC(s). See CLEARING DIAGNOSTIC TROUBLE CODES  . Recheck system and verify repair is complete.
scientia non olet · About LEMON Manuals