Park/Neutral Position Switch
NOTE:
When installing and adjusting transaxle range switch, ensure switch "O" ring is not dislodged.
- Set transaxle selector lever to Neutral. Loosen retaining nut, but do not remove transaxle shift control cable from manual control lever. Ensure manual control lever is still in Neutral.
- Loosen the control cable to the manual control lever coupling nut to free the cable and lever.
- Set the manual control lever to the Neutral position.
- Loosen the transaxle range switch body mounting bolts and then turn the transaxle range switch body so the hole in the end of the manual control lever and the hole in the flange of the transaxle range switch body flange are aligned. See Fig 1 .
- Tighten transaxle range switch body mounting bolts to specification. Ensure switch body position does not change.
- Gently pull transaxle shift control cable away from manual control lever. Tighten control lever coupling nut. Ensure selector lever is in Neutral. Ensure each range on transaxle operates and functions correctly for each selector lever position.