LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Santa Fe Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Console >> Removal And Installation

Removal And Installation

  1. Remove the screws holding the console side cover and remove the console side cover.
    Fig 1: Identifying Screws Holding Console Side Cover
    G03847972Courtesy of HYUNDAI MOTOR CO.
  2. Remove the screws holding the floor console assembly and then pull out the floor console.
    Fig 2: Identifying Screws Holding Floor Console Assembly
    G03847973Courtesy of HYUNDAI MOTOR CO.
  3. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals