Sensor Inspection
WARNING: This page is about a different car, the 2005 Hyundai Accent and 2004 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the knock sensor connector and measure resistance between terminals 1 and 2.
Standard value : about 5MΩ [at 20°C (68°F)]
- If the resistance is continuous, replace the knock sensor.
Tightening torque
Knock sensor:
16~25 Nm (160~250 kg.cm, 12~18 lb.ft)
- Measure the capacitance between terminals 1 and 2.
Standard value : 800~1600 pF