Fuel Injector: Installation

WARNING: This page is about a different car, the 2005 Hyundai Accent and 2004 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.

Install a new grommet and O-ring to the injector.
Apply a coating of solvent, spindle oil or gasoline to the O-ring of the injector.

Fig 1: Identifying Injector
Courtesy of HYUNDAI MOTOR CO.
While turning the injector to the left and right, fit it on to the delivery pipe. Break
Be sure the injector turns smoothly.
NOTE: If it does turn smoothly, the O-ring may be jammed: Remove the injector and re-insert it into the delivery pipe and recheck.

Fig 2: Turning Injector To Fit It On To The Delivery Pipe
Courtesy of HYUNDAI MOTOR CO.