Cam Shaft: Inspection: Notes
- Check the camshaft journals for wear. If the journals are badly worn, replace the camshaft.
- Check the cam lobes for damage. If the lobe is damaged or worn excessively, replace the camshaft.
- Standard value
- Intake: 43.4484 mm (1.7106 in.)
- Exhaust: 43.8489 mm (1.7263 in.)
- Limit
- Intake: 42.9484 mm (1.6909 in.)
- Exhaust: 43.3489 mm (1.7066 in.)
Courtesy of HYUNDAI MOTOR CO.
- Check the cam surface for abnormal wear or damage, and replace if necessary.
- Check each bearing for damage. If the bearing surface is excessively damaged, replace the cylinder head assembly or camshaft bearing cap, as necessary.
- Camshaft end play: 0.1 - 0.2 mm (0.0039 - 0.0079 in.)