Power Mirror Switch
Remove power mirror switch assembly on driver's door. Disconnect harness connectors and ensure continuity exists between specified power mirror switch terminals with switch in specified position. See POWER MIRROR SWITCH CONTINUITY TEST table. See Fig 1 . See WIRING DIAGRAMS . If continuity does not exist, replace power mirror switch.
POWER MIRROR SWITCH CONTINUITY TEST
| Switch Position (1) | Continuity Between Terminals No. | |||
|---|---|---|---|---|
| Left Mirror | ||||
| Up | 3 & 7; 5 & 6 | |||
| Down | 3 & 5; 6 & 7 | |||
| Left | 3 & 8; 5 & 6 | |||
| Right | 3 & 5; 6 & 8 | |||
| Right Mirror | ||||
| Up | 1 & 3; 5 & 6 | |||
| Down | 1 & 6; 3 & 5 | |||
| Left | 3 & 4; 5 & 6 | |||
| Right | 3 & 5; 4 & 6 | |||
|
||||