DTC P1307, DTC P1308 & DTC P1309: Notes

Code Definition

DTC P1307: Acceleration Sensor Not Rational
DTC P1308: Acceleration Sensor Signal Check Low
DTC P1309: Acceleration Sensor Signal Check High

NOTE: Before performing any diagnostic test, refer to WARNINGS, CAUTIONS and NOTES in DIAGNOSTIC TESTS .

NOTE: Testing individual components does not isolate shorts or opens. Perform all voltage tests using a Digital Volt-Ohm Meter (DVOM) with a minimum 10-megohm input impedance, unless stated otherwise in test procedure. Use ohmmeter to isolate wiring harness shorts or opens.