LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2001 >> Sonata GLS, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Troubleshooting >> Scan Tool Check

Scan Tool Check

  1. Turn the ignition OFF.
  2. Connect the Scan tool to the data link connector located underneath low crash pad panel.
  3. Turn the ignition ON.
  4. Use the Scan tool to check the self-diagnosis codes.
  5. After completion of the repair or correction of the problems, turn the ignition switch; then erase the stored faults codes using the clear key.
  6. Disconnect the Scan tool.
    Fig 1: DLC Connector Terminals
    G02180911
scientia non olet · About LEMON Manuals