Power Mirror Switch: Accent

Remove power mirror switch. Disconnect harness connector. Ensure continuity exists between specified terminals with switch in specified position. See POWER MIRROR SWITCH CONTINUITY TEST (ACCENT) table. See Fig 1. See WIRING DIAGRAMS . If continuity does not exist, replace power mirror switch.

POWER MIRROR SWITCH CONTINUITY TEST (ACCENT)

Switch Position ⁽¹⁾

⁽²⁾ Continuity Between Terminals No.

Left Mirror

1 & 7; 3 & 6

Down

1 & 3; 6 & 7

Left

1 & 7; 3 & 5

Right

1 & 3; 5 & 7

Right Mirror

1 & 7; 2 & 3

Down

1 & 3; 2 & 7

Left

1 & 7; 3 & 4

Right

1 & 3; 4 & 7

⁽¹⁾	Continuity should not exist with up/down and left/right switches in off position.

⁽²⁾	See Fig 1. See WIRING DIAGRAMS .

Fig 1: Identifying Power Mirror Switch Terminals (Accent & Sonata)

Courtesy of HYUNDAI MOTOR CO.