Power Mirror Switch
Remove power mirror switch. Disconnect harness connector and ensure continuity exists between specified terminals with switch in specified position. See POWER MIRROR SWITCH CONTINUITY TEST . SeeFig 1 . If continuity does not exist, replace power mirror switch.
POWER MIRROR SWITCH CONTINUITY TEST
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 1 & 7; 4 & 6 | |
| Down | 1 & 6; 4 & 7 | |
| Left | 1 & 7; 4 & 5 | |
| Right | 1 & 5; 4 & 7 | |
| Right Mirror | ||
| Up | 1 & 7; 3 & 4 | |
| Down | 1 & 3; 4 & 7 | |
| Left | 1 & 7; 2 & 4 | |
| Right | 1 & 2; 4 & 7 | |