LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1996 >> Sonata Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls - Basic Testing - 3.0L V6) >> Ignition Checks >> Electronic Ignition System (EIS) >> Power Transistor

Power Transistor

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect connector from power transistor. Apply 3.0 volts between power transistor terminals No. 1 (positive) and No. 2 (negative). See Fig 1 .
  2. Check continuity between terminals No. 2 and 3. With voltage applied to terminal No. 1, continuity should exist. With voltage removed from terminal No. 1, continuity should not exist. Replace power transistor if continuity is not as specified.
Fig 1: Power Transistor Connector Terminal ID (Sonata 3.0L)
G95F30960Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals