Power Window Switches

NOTE: Main switch assembly is located on driver's door. Sub-switch is mounted at each passenger's door.

Remove power window switch to be tested. Check continuity in each switch position, between indicated switch terminals. See appropriate table. SeeFig 1 for sub-switch terminals. Replace switch if continuity is not as specified.

POWER WINDOW MAIN SWITCH TEST

Switch Position

Continuity Between Terminals

Left Front

YEL/RED & BLU/WHT; BLK & BRN

Neutral

BLK, BRN & BLU/WHT

Down

YEL/RED & BRN; BLK & BLU/WHT

Right Front

YEL/RED & RED/BLK; BLK & RED

Neutral

BLK, RED/BLK & RED

Down

YEL/RED & RED; BLK & RED/BLK

Left Rear

⁽¹⁾ YEL/RED & RED/BRN; BLK & RED/BLU

Neutral

BLK, RED/BRN & RED/BLU

Down

⁽²⁾ YEL/RED & RED/BLU; BLK & RED/BRN

Right Rear

YEL/RED & BLU/BLK; BLK & RED/GRN

Neutral

BLK, BLU/BLK & RED/GRN

Down

YEL/RED & RED/GRN; BLK & BLU/BLK

Lock Switch

Lock

None

Unlock

YEL/RED & BLU/RED

⁽¹⁾	On 1995 models, there should be continuity between Yellow/Red wire and Red/Blue wire terminals, and between Black wire and Red/Brown wire terminals.

⁽²⁾	On 1995 models, there should be continuity between Yellow/Red wire and Red/Brown wire terminals, and between Black wire and Red/Blue wire terminals.

POWER WINDOW SUB-SWITCH TEST

Switch Position	Continuity Between Terminals No.
Up	1 & 3; 4 & 7
Neutral	1 & 3; 6 & 7
Down	3 & 4; 6 & 7

Fig 1: Power Window Sub-Switch Terminals

Courtesy of HYUNDAI MOTOR CO.