Reed Switch
Remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Using ohmmeter, check continuity between reed switch terminals while rotating speedometer cable. Ohmmeter reading should alternate between continuity and no continuity as cable is rotated.
SPEEDOMETER TEST (1)
| Speed (MPH) (2) | Acceptable Range (MPH) | ||||
|---|---|---|---|---|---|
| 10 | 10-13 | ||||
| 20 | 20-22 | ||||
| 40 | 40-43 | ||||
| 60 | 60-62.8 | ||||
| 80 | 80-84.1 | ||||
| 100 | 100-104.1 | ||||
| 120 | 120-124.1 | ||||
|
|||||