LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1996 >> Accent Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension System >> Removal & Installation >> Lower Control Arm >> Inspection

Lower Control Arm: Inspection

  1. Check for damaged ball joint dust cover, bent or cracked control arm. Check lower ball joints. See BALL JOINT CHECKING  under ADJUSTMENTS & INSPECTION.
  2. Inspect control arm bushings for cracks or deterioration. Replace bushings if damaged. See CONTROL ARM BUSHINGS  .
  3. If ball joint dust cover requires replacement, remove dust cover from ball joint. Pack ball joint with a SAE J-310 NLGI grade No. 2 grease.
  4. Using Dust Cover Installer (09545-21100), install dust cover. Drive dust cover installer onto ball joint until dust cover is fully seated.
scientia non olet · About LEMON Manuals