Reed Switch
Remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Using ohmmeter, check continuity between reed switch terminals while rotating speedometer cable. Ohmmeter reading should alternate between continuity and no continuity as cable is rotated.
SPEEDOMETER TEST (1)
| Speed (MPH) (2) | Acceptable Range (MPH) | ||||
|---|---|---|---|---|---|
| 10 | 10-12.5 | ||||
| 20 | 20-22 | ||||
| 40 | 40-42.5 | ||||
| 60 | 60-63.2 | ||||
| 80 | 80-83.3 | ||||
| 100 | 100-103.3 | ||||
| 120 | 120-123.3 | ||||
|
|||||