Shift Linkage Adjustment
WARNING: This page is about a different car, the 1989 Mitsubishi Galant, 1988 Mitsubishi Galant Sigma, and 1987 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
Shift cable is adjusted at transaxle/transmission end of cable. Place shift lever Neutral. Ensure shift lever and neutral safety switch are in Neutral position. If cable was replaced, ensure toothed washer is installed (if equipped). See Fig 1. Turn adjuster at cable end so it fits into manual lever on transaxle/transmission and no slack exists in the cable. See Fig 1.