Cd Player Error Codes (96-90-002)

Publication date: 1996-01-01
Reference number: 96-90-002

CD PLAYER ERROR CODES

TECHNICAL SERVICE BULLETIN

Reference Number(s): 96-90-002, Date of Issue: January, 1996

HYUNDAI:	Elantra 1992-1995, Scoupe 1991-1995 and Sonata 1990-1994
GROUP:	90 - Electrical

DESCRIPTION

If a CD player malfunction occurs, an error code will appear on the LED display. The following list describes each error code, and a troubleshooting step to assist in correcting the malfunction.

CD PLAYER ERROR CODES DESCRIPTION

ERROR CODE	ERROR TYPE	MALFUNCTION	RESOLUTION
Er1	Memory error	Data error occurred due to discharge of battery in auto change mode.	Cycle power to CD player.
Er2	Mechanism error	When ejection does not occur after 3 attempts.	Replace CD player.
Er3	Functional error	When the focus does not adjust, even after several retries.	Try known good disc.
Er5	Data disc	When data is not read after disc is inserted. "Error" displays for 5 seconds then disc is ejected.	Try known good disc.
Er6	Disc error	When data is not read after disc is inserted. "Error" displays for 5 seconds then disc is ejected.	Try known good disc.
Er8	Eject error	When eject does not function. Usually due to a foreign substance, (screw, coin, etc.).	Check for foreign substance.
Er0	DSP error	Communication error between DSP unit and controller.	Replace CD player.
HHH	Temperature error	When CD player gets too warm.	Cycle power to CD player.