LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1992 >> Sonata Base, 3.0 T >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Testing >> Switch

Component Testing: Switch

Remove switch in question and perform continuity testing according to appropriate table.

Fig 1: Identifying Main Switch Connector
G93C82406Courtesy of HYUNDAI MOTOR CO.
Fig 2: Identifying Sub-Switch Connector
G93D82407Courtesy of HYUNDAI MOTOR CO.
MAIN SWITCH CONTINUITY TESTING (1)

Position Condition (2) Terminals
Left Front Up No. 3 & 5; 11 & 16
" Off No. 5, 11 & 16
" Down No. 3 & 16; 5 & 7
Right Front Up No. 3 & 6; 11 & 15
" Off No. 6, 11 & 15
" Down No. 3 & 15; 5 & 11
Left Rear Up No. 3 & 7; 11 & 14
" Off No. 7, 11 & 14
" Down No. 3 & 14; 7 & 11
Right Rear Up No. 3 & 4; 11 & 12
" Off No. 4, 11 & 12
" Down No. 3 & 12; 4 & 11
(1) Disconnect switch before testing. Check continuity between terminals. If continuity does not exist, replace switch.
(2) SeeFig 1 .
CONTINUITY TESTING SUB-SWITCH (1)(2)

Position (3) Terminals
Up No. 2 & 4; 5 & 6
Off No. 1 & 2; 5 & 6
Down No. 1 & 2; 4 & 5
(1) Disconnect switch before testing. Check continuity between terminals. If continuity does not exist, replace switch.
(2) Continuity between terminals No. 3 & 7 with switch ON, and no continuity with switch OFF.
(3) SeeFig 2 .
scientia non olet · About LEMON Manuals