LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1992 >> Excel Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Servicing - A/T) >> Neutral Safety Switch Adjustment >> Conquest

Neutral Safety Switch Adjustment: Conquest

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1989 Plymouth Colt Vista, 1989 Plymouth Colt, 1989 Dodge Ram 50, 1989 Dodge Raider, and 1989 Dodge Colt Vista. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place transmission in Neutral. Remove screw on bottom of neutral safety switch at transmission. This screw is removed for alignment pin installation. Loosen attaching bolts. See Fig 1.
  2. Using an .08" (2.0 mm) alignment pin, move switch until pin falls into hole in rotor. Tighten attaching bolts to 43-61 INCH lbs. (5-7 N.m).
Fig 1: Adjusting Neutral Safety Switch (Conquest)
G82793Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals