LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1991 >> Excel GL, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Component Testing >> Hazard Warning Switch >> Scoupe

Hazard Warning Switch: Scoupe

  1. Check for blown fuse No. 13 and/or flasher. Flasher is located in relay box, behind left dash. Hazard switch is located to right of instrument cluster, in clock assembly bezel. Remove clock assembly by prying outward. Unplug harness connectors. Remove hazard switch retaining screws. Pry switch from panel.
  2. With switch in OFF position, use ohmmeter to ensure continuity exists between terminals No. 3 and 9. See Fig 1 . With switch in ON position, continuity should exist between terminals No. 2, 6, 7, 8, and between terminals No. 4 and 9. Terminals No. 1 and 5 are for bulb illumination. Terminal No. 3 is fused input power supply to switch.
Fig 1: Identifying Hazard Switch Terminals (Typical)
G92A00265Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals