Power Mirror Switch
Remove power mirror switch. Disconnect harness connector and check for continuity at switch terminals with switch in indicated positions. See Fig 1 . See POWER MIRROR SWITCH CONTINUITY TEST table. Replace switch if it does not test as specified.
POWER MIRROR SWITCH CONTINUITY TEST
| Application | Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 5&3, 7&4 | |
| Down | 5&4, 7&3 | |
| Off | No Continuity | |
| Left | 1&3, 7&4 | |
| Right | 1&4, 7&3 | |
| Right Mirror | ||
| Up | 6&4, 7&4 | |
| Down | 6&4, 7&3 | |
| Off | No Continuity | |
| Left | 2&3, 7&4 | |
| Right | 2&4, 7&3 | |