LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1989 >> Excel GS, Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Overhaul >> Steering Column >> Inspection

Steering Column: Inspection

  1. Check steering shaft for runout. Runout should be .02" (.5 mm) or less. Check for worn or damaged bearing. Check steering shaft length.
  2. Steering shaft length should be 23.17" (588.5 mm). If measurement is less than specification, replace steering shaft. See Fig 1 .
  3. On intermediate shaft, check for play, noise or rough rotation in joints. Check dust cover for damage. Replace components as required.
Fig 1: Steering Shaft Length & Runout
G51200Courtesy of HYUNDIA MOTOR CO.
scientia non olet · About LEMON Manuals