Pinion Preload
Using Adaptor (MB990228-01 ) and torque wrench, measure preload while turning pinion gear through one rotation. If preload is not 5-11 INCH lbs. (5-11 N.m), adjust rack support cover. Check preload again. Tighten lock nut.
Using Adaptor (MB990228-01 ) and torque wrench, measure preload while turning pinion gear through one rotation. If preload is not 5-11 INCH lbs. (5-11 N.m), adjust rack support cover. Check preload again. Tighten lock nut.