LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3T Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Power Steering System) >> Repair Instructions >> Steering Linkage Outer Tie Rod Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the inner tie rod threads with a suitable chassis lubricant before installing the outer tie rod.
  2. Install the NEW jam nut to the outer tie rod.
  3. Install the outer tie rod to the inner tie rod.
    4. Fig 1: View Of Outer Tie Rod Retaining Nut
    GM1207238Courtesy of GENERAL MOTORS CORP.
  4. Install the outer tie rod to the steering knuckle.
    5. CAUTION: Refer to Fastener Caution .
  5. Install the NEW outer tie rod retaining nut.
    • Tighten the outer tie rod retaining nut to 45 N.m (33 lb ft) plus 95 degrees.
    • Tighten the outer tie rod end jam nut to 70 N.m (52 lb ft).
  6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  7. Lower the vehicle.
  8. Adjust the front toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment .
scientia non olet · About LEMON Manuals