LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3T Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Lighting System) >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the stop lamp switch electrical connectors (1).
    2. Fig 1: View Of Stop Lamp Electrical Connectors
    GM1607450Courtesy of GENERAL MOTORS CORP.
  2. Rotate the switch counterclockwise.
  3. Remove the switch from the bracket.
  4. Remove the switch from the vehicle.
scientia non olet · About LEMON Manuals