LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3T Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Rear Suspension System) >> Repair Instructions >> Rear Spring Shackle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Spring Hanger Bracket Bolts
    GM941646Courtesy of GENERAL MOTORS CORP.
  1. Install the shackle assembly to the spring.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the shackle nut and bolt to the spring and tighten to 85 N.m (63 lb ft).
  3. Install the shackle nut and bolt to the frame and tighten to 85 N.m (63 lb ft).
  4. Remove the rear axle support.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals