Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Engine Wiring Harness

Courtesy of GENERAL MOTORS CORP.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Disconnect the engine wiring harness electrical connector (3) from the crankshaft position (CKP) sensor (1).

Fig 2: View Of Crankshaft Position Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the CKP sensor bolt.
Remove the CKP sensor from the engine block.
Discard the O-ring seals.