Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The turn signal multifunction switch and Inflatable restraint steering wheel module coil are serviced as an assembly.

Remove the steering wheel. Refer to Steering Wheel Replacement .
Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement .

Fig 1: View Of Wire Harness Straps & Assembly

Courtesy of GENERAL MOTORS CORP.

Disconnect any electrical connectors and remove the wiring harness from any retainers as needed.

Fig 2: View Of Multifunction Switch/SIR Coil Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the turn signal multifunction switch bolts.
Slide the multifunction turn signal switch off of the steering column.