LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3T Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Steering Wheel & Steering Column) >> Repair Instructions >> Steering Column Tilt Spring Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Tilting Column To Up Position
    GM293245Courtesy of GENERAL MOTORS CORP.
  1. Tilt the steering column to the UP position.
    2. Fig 2: Spring Guide & Tilt Spring
    GM293250Courtesy of GENERAL MOTORS CORP.
  2. Install the spring guide into the tilt spring.
    3. Fig 3: Identifying Tilt Spring And The Steering Column Support Assembly
    GM293251Courtesy of GENERAL MOTORS CORP.
  3. Install the tilt spring (1) onto the steering column housing support (2) and onto the steering column tilt head housing by using the following procedure:
    1. Install the tilt spring (1) onto the steering column tilt head housing.
    2. Install the tilt spring (1) onto the post on the steering column housing support (2).
  4. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement .
  5. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals