LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3T Base, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Connecting Procedure

Connecting Procedure

    Fig 1: Battery Cables
    GM1560039Courtesy of GENERAL MOTORS CORP.
  1. Clean any existing corrosion from the battery terminal and battery cable (1) using a wire brush.
  2. Install the negative battery cable (1) to the battery. (RPO LLR shown, RPO LH8 similar).
    3. CAUTION: Refer to Fastener Caution .
  3. Tighten the negative battery cable nut (2) to 9 N.m (80 lb in).
  4. Close the negative battery cable cover.
  5. Reset all preset and theft codes previously recorded to the radio.
scientia non olet · About LEMON Manuals