LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Engine Cooling System) >> Repair Instructions >> Radiator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fan shroud. Refer to Engine Coolant Fan Shroud Replacement (LLV, LLR)  or Engine Coolant Fan Shroud Replacement (LH9) .
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
    3. Fig 1: View Of Radiator Hose Clamps
    GM753673Courtesy of GENERAL MOTORS CORP.
  3. Using J 38185  reposition the radiator outlet hose clamp (2) from the radiator. See Special Tools .
  4. Remove the outlet radiator hose (1) from the radiator.
    5. Fig 2: View Of Transmission Cooler Lines At Radiator
    GM1566575Courtesy of GENERAL MOTORS CORP.
  5. Remove the transmission cooler lines from the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  6. Lower the vehicle.
  7. Remove the radiator vent inlet hose from the radiator.
  8. Remove the radiator mounting bracket bolt.
  9. Remove the radiator mount.
  10. Remove the grill.
  11. Remove the condenser mounting bolts.
  12. Separate the condenser from the radiator.
  13. Remove the radiator.
scientia non olet · About LEMON Manuals