LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraints >> Repair Instructions >> Inflatable Restraint Seat Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the seat from the vehicle. Refer to Front Seat Replacement - Bucket .
  2. Ensure that the seat is in the full rear position.
    3. Fig 1: Seat Position Sensor Components
    GM1334868Courtesy of GENERAL MOTORS CORP.
  3. Locate the seat position sensor (1) under the seat on the inside of the inner seat rail.
  4. Disconnect the electrical connector (3) from the seat position sensor (1).
  5. Remove the 2 screws that retain the seat position sensor to the seat rail.
  6. Remove the seat position sensor from the seat.
scientia non olet · About LEMON Manuals