LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Rear Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the wheel stud in the axle flange.
    2. Fig 1: Identifying Lug Nut
    GM690039Courtesy of GENERAL MOTORS CORP.
  2. Install the 4 washers and the lug nut to the stud.
  3. Tighten the lug nut until the stud fully seats.
  4. Remove the lug nut and the washers.
    5. Fig 2: View Of Rear Brake Drum
    GM1254558Courtesy of GENERAL MOTORS CORP.
  5. Install the rear brake drum. Refer to Brake Drum Replacement .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals