LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Rear Suspension System) >> Repair Instructions >> Shock Absorber Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the absorber.
    2. CAUTION: Refer to Fastener Caution .
    Fig 1: View Of Upper Absorber Bolts
    GM941579Courtesy of GENERAL MOTORS CORP.
  2. Install the upper absorber bolts and tighten to 35 N.m (26 lb ft).
    3. Fig 2: View Of Lower Shock Absorber Mounting Bolt & Nut
    GM941550Courtesy of GENERAL MOTORS CORP.
  3. Install the lower absorber bolt and nut and tighten the nut to 95 N.m (70 lb ft).
  4. Remove the rear axle support.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals