LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Rear Suspension System) >> Repair Instructions >> Rear Spring Shackle Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: View Of Rear Spring Hanger Bracket Bolts
    GM941646Courtesy of GENERAL MOTORS CORP.
  2. Support the rear axle at ride height.
  3. Remove the shackle nut and the bolt from the frame.
  4. Remove the shackle nut and the bolt from the spring.
  5. Remove the shackle assembly from the vehicle.
scientia non olet · About LEMON Manuals