LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Rear Suspension System) >> Repair Instructions >> Rear Spring Shackle Bushing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Using J 21474-01
    GM1241413Courtesy of GENERAL MOTORS CORP.
  1. Install the new spring shackle bushing using J 21474-01  . See Special Tools .
    2. Fig 2: View Of Bushing Flange
    GM1241414Courtesy of GENERAL MOTORS CORP.
  2. Pull the spring shackle bushing into the frame rail until the flanged portion of the spring shackle bushing is flush with the rail.
    3. Fig 3: View Of Spring Shackle Bushing Inner Flange
    GM1364154Courtesy of GENERAL MOTORS CORP.
  3. Use a blunt punch to stake or flare the spring shackle bushing inner flange.
  4. Install the spare tire when servicing the left side bushing.
  5. Install the spring shackle. Refer to Rear Spring Shackle Replacement .
scientia non olet · About LEMON Manuals