LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Disc Brake System) >> Repair Instructions >> Brake Caliper Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Brake Caliper Mounting Bracket
    GM1241358Courtesy of GENERAL MOTORS CORP.
  1. Install the brake caliper bracket.
    2. Fig 2: View Of Brake Caliper Mounting Bracket Mounting Bolts
    GM1241469Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the 2 brake caliper bracket bolts and tighten to 180 N.m (133 lb ft).
  3. Install the disc brake pads to the brake caliper bracket.
  4. Install the brake caliper. Refer to Brake Caliper Replacement .
scientia non olet · About LEMON Manuals