Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Refer to Brake Dust Warning .

Fig 1: Wheel Speed Sensor Bolts

Courtesy of GENERAL MOTORS CORP.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the wheel speed sensor bolts (1).

Fig 2: Wheel Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the wheel speed sensor (1) from the drum brake backing plate by carefully pulling straight outward.

Fig 3: Wheel Speed Sensor Harness Retainers

Courtesy of GENERAL MOTORS CORP.

Release the wheel speed sensor harness retainers (1) on the rear park brake cable.
Release the harness from the retainers.

Fig 4: Wheel Speed Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the wheel speed sensor electrical connector (1).
Release the electrical connector and harness retainer (2) from the frame.
Remove the wheel speed sensor assembly.