LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> DTC B1492 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine running, observe the scan tool ECM GEN-F Terminal Signal parameter. The parameter should read greater than 5 percent.
    • If not within the specified range, refer to ECM Field Duty Cycle Signal Circuit Malfunction in Circuit/System Testing .
  2. Verify that the GBCM does not set DTC B1492.
    • If the GBCM sets DTC B1492, refer to GBCM Field Duty Cycle Signal Circuit Malfunction in Circuit/System Testing .
scientia non olet · About LEMON Manuals