LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Fixed And MOVEABLE Windows System) >> Diagnostic Information and Procedures >> Power Windows Malfunction (Crew Cab) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, command the each window UP and DOWN using the window switches on the driver master control and the respective passenger door window switch. Each window should perform the UP and DOWN functions from each switch.
    • If the driver door window is inoperative, refer to Driver Power Window Malfunction in Circuit/System Testing .
    • If the front passenger door window is inoperative, refer to Passenger Power Window Malfunction in Circuit/System Testing .
    • If the left rear or right rear door window is inoperative, refer to Rear Power Window Malfunction in Circuit/System Testing .
  2. Disable the passenger window switches by activating the window lockout switch on the driver master control. The passenger windows should be inoperative from the passenger door window switches.
    • If the front window switch is still active, refer to Passenger Power Window Malfunction in Circuit/System Testing .
    • If the rear window switches are still active, refer to Rear Power Window Malfunction in Circuit/System Testing .
  3. Command the express down function of the driver door window by pressing down on the driver's window switch past the first detent and releasing. The drivers window should roll completely down.
    • If the function does not perform as specified, replace the driver window switch.
scientia non olet · About LEMON Manuals