LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2010 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 1980 (Front Drive Axle) >> Repair Instructions >> Gear Tooth Contact Pattern Inspection >> Correct Contact Pattern

Correct Contact Pattern

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Correct Gear Tooth Contact Pattern
GM569603Courtesy of GENERAL MOTORS COMPANY

Condition 

The backlash and pinion depth is correct.

Correction 

None required.

Service Hints 

Loose bearing on the drive pinion or in the differential case may cause patterns that vary. If the contact pattern varies, inspect the following preload settings:

If these settings are correct, inspect for damage or incorrectly assembled parts.