Removal Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to the OFF position.
- Remove the spare tire and wheel assembly. Refer to Spare Wheel Hoist Replacement .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the fuel pump flow control module (1). Refer to Fuel Pump Flow Control Module Replacement .
- Remove the trailer brake control relay bolts (1).
- Disconnect the electrical connector and remove the trailer brake control relay (1).
NOTE:
Do not remove the spare wheel hoist.