Liftgate Window Latch Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement . |
|
| 1 | Liftgate Trim Upper - Pushpin (Qty: 2) Tip: To remove the pushpins, open the liftgate glass. |
| 2 | Liftgate Window Latch Screw (Qty: 3)
NOTE:
Refer to Fastener Notice
. Tip: LOOSEN the screws using the TORX head end. Remove the latch using the key holes in the liftgate panel. Bolts are left hand thread. Tighten: 9 N.m (80 lb in) |
| 3 | Liftgate Window Latch Assembly Tip: Disconnect the electrical connector. |