Endgate Handle Replacement

Fig 1: Endgate Handle Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the endgate upper finish molding cap. Refer to Endgate Upper Finish Molding End Cap Replacement (H3T) . Remove the endgate liner panel bolts and pan. Refer to Pickup Box Endgate Liner Replacement (H3T) . Remove the pickup box endgate latch bezel. Refer to Pickup Box Endgate Latch Handle Bezel Replacement (H3T) .
1	Endgate Handle Bolts (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 25 N.m (18 lb ft)
2	Endgate Handle Assembly Procedure: Disconnect the actuator rods.

Callout

Component Name

Preliminary Procedures

Remove the endgate upper finish molding cap. Refer to Endgate Upper Finish Molding End Cap Replacement (H3T) .
Remove the endgate liner panel bolts and pan. Refer to Pickup Box Endgate Liner Replacement (H3T) .
Remove the pickup box endgate latch bezel. Refer to Pickup Box Endgate Latch Handle Bezel Replacement (H3T) .

Endgate Handle Bolts (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten: 25 N.m (18 lb ft)

Endgate Handle Assembly
Procedure:
Disconnect the actuator rods.