LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H3T Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Repair Instructions >> Exhaust System Insulator, Hanger, Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Exhaust Pipe Hanger
    GM1313623Courtesy of GENERAL MOTORS CORP.
    NOTE: Do not use oil base lubricants.
  1. Apply a soapy solution to the following in order to ease the installation of the hanger (1):
    • The frame support bracket rod (2)
    • The inner diameter of the exhaust pipe hanger (1)
    • The exhaust pipe hanger rod (3)
  2. Press the exhaust pipe hanger (1) over the following:
    • The frame support bracket rod (2)
    • The exhaust pipe hanger rod (3)
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals