LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H3 Base, Automatic >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Replacement >> Installation Procedure

Installation Procedure

  1. Install the insulators to the stabilizer shaft.
    2. Fig 1: View of Insulator Clamp Bolts
    GM1559083Courtesy of GENERAL MOTORS CORP.
  2. Install the stabilizer shaft.
  3. Install the clamps over the insulators and the stabilizer shaft.
    4. CAUTION: Refer to Fastener Caution .
  4. Install insulator clamp bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  5. Support the lower control arms at curb height.
    6. Fig 2: View Of Link Assembly
    GM1559081Courtesy of GENERAL MOTORS CORP.
  6. Install the link assemblies.
  7. Install the nuts to the link assemblies.

    Tighten:  Tighten the nut to 80 N.m (59 lb ft).

  8. Lower the vehicle.
scientia non olet · About LEMON Manuals