LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H3 Base, Automatic >> Repair and Diagnosis >> Electrical >> Wiring Diagrams >> Component Connector End Views (2 Of 3) >> Fuel Pump Flow Control Module (SUV)

Fuel Pump Flow Control Module (SUV)

Fig 1: Fuel Pump Flow Control Module (SUV) - Connector End View
GM1858233Courtesy of GENERAL MOTORS CORP.
Fuel Pump Flow Control Module (SUV)

Pin Wire Circuit Function
1 3 BK 1350 Ground
2-4 - - Not Available
5 0.5 GY 7447 Low Reference
6 0.5 TN 2501 High Speed GMLAN Serial Data Bus-
7 0.5 TN/BK 2500 High Speed GMLAN Serial Data Bus+
8-9 - - Not Available
10 0.5 PU 7446 Fuel Line Pressure Sensor Signal
11-12 - - Not Available
13 0.5 D-GN/WH 465 Fuel Pump Relay Control - Primary
14 - - Not Available
15 0.5 PK 1439 Ignition 1 Voltage
16 2.0 PK 1580 Low Reference
17 0.5 BN 4 Ignition Voltage
18-20 - - Not Available
21 0.5 TN 2501 High Speed GMLAN Serial Data Bus-
22 0.5 TN/WH 2500 High Speed GMLAN Serial Data Bus+
23-31 - - Not Available
32 3.0 RD/WH 1940 Battery Positive Voltage
33-35 - - Not Available
36 0.5 BN 7445 5-Volt Reference
37-43 - - Not Available
44 0.5 GY 7443 Fuel System Control Module Shield Extension
45-46 - - Not Available
47 2.0 GY 120 Fuel Pump Supply Voltage
Connector Part Information 
  • Harness: Chassis
  • OEM: ASGPB-1547L2A-K
  • Service: See Catalog
  • Description: 47-Way F ASG Series, Sealed (BK)
Terminal Part Information 
  • Pins: 1, 16, 32, 47
  • Release Tool/Test Probe: 15315247/J-35616-42 (RD)
  • Pins: 5-7, 10, 13, 15, 17, 21, 22, 36, 44
  • Terminal/Tray: SAITS-A03T-M064/14
  • Core/Insulation: 9/9
  • Release Tool/Test Probe: J-38125-215A/J-35616-64B (L-BU)