LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls And Fuel - 3.7L - Introduction) >> Repair Instructions >> Fuel Tank Replacement >> Assembly Procedure

Assembly Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Fuel Tank Lines
    GM1564233Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank module. Refer to Fuel Tank Module Replacement .
  2. Install and engage the EVAP vapor line (2) to the retaining clip.
  3. Connect the EVAP vapor line (2) to the fuel tank vent valve, and fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install and engage the fuel feed line (1) to the fuel tank.
  5. Using a flare nut wrench and a back up wrench, Connect the fuel feed line (1) fitting to the fuel tank module and tighten to 30 N.m (22 lb ft).
scientia non olet · About LEMON Manuals